Tag Archive for: Wyoming

The Grindstone, a backcountry elk hunt, montana wild, blog post, hunting film

THE GRINDSTONE – A BACKCOUNTRY ELK HUNT

trail cameras, elk hunting, scouting, montana wild

Nine trail cameras set and pulled, 5 1/2 days of pre-season scouting, 78 bulls glassed up and the search for something worthy of my long awaited tag continued. As a hunter I’ve really only ever known one way of finding success, and that’s simply outworking other hunters and putting a lot of time into hunts. So far this one was shaping up to be similar to many hunts over the years, work hard, work harder, and hopefully turn up something that gets your heart going. If I’m being honest, this challenge is what keeps me coming back. Hunting is hard and when you start trying to find the most mature animals in your area the odds only stack harder against you.

elk scouting, elk, camping, tents, zack boughton, montana wild

Jordan and I crested the last ridge just as daybreak was spilling across the giant flat in front of us. Down below us I immediately spotted elk as the wind ripped at our backs and jostled our glass. One look and I knew a closer look was in order. The Leica was soon clipped into the tripod and I was looking at the best bull we’d seen yet. I thought I’d seen him two days earlier as I’d finished pulling cams before restocking but he was a long ways off. Now we were a 1000 yards out and he looked bigger. Before I could really size him up he slipped down into a ravine with his cows and was gone. We set camp and decided to make a big loop and get a better vantage for the evening. In two days season would open and we wanted to know if this bull was going to be our target or not. That evening we slipped into 300 yards of the bull and his cows. The wind was screaming and the elk were between us and our tents so close proximity was necessary. I also wanted a close look.

elk, bull elk, 330 bull, 340 bull, hunting, rifle hunting, montana wild, hunt film

After studying him for over an hour I was unsure if he was the one. Now in MT I would shoot this bull but I’d waited 12 years to draw this tag and the unit has produced some giants over the years. This is the interesting part about draw tags. You have to equip yourself with a whole new set of standards and expectations that aren’t your norm. Doing that brings a lot of questions and uncertainty into the picture. At the end of it we decided this bull was a high 330s bull or low 340s, a damn nice bull. That said, if you want to kill 350+ bulls you need to be able to pass damn nice bulls. At the end of the day this bull didn’t scream “hell yes” when I looked at him. I knew what could be living in this unit and I had a long season in front of me with a rifle in hand. I was going to roll the dice on this one and put the work in to see if I could find a bigger bull in the unit.

Opening day had come and gone and we had now looked over 135 bulls not including the photos on my trail cam. Lots of 290-320 bulls seemed to be the norm. It was fun hunting, my brother Travis behind the camera and Jordan Blase with me helping look over animals and gameplan our approach to hunting the unit. We were having fun but warm weather and high winds seemed to be keeping elk movement minimal and hunter pressure was high in the corner of the unit that seemed to be holding the majority of the elk. We decided to pull camp and continue on in search of less pressure and hopefully a big, old bull that was hiding out in more remote country.

hunting, montana wild, elk

Days later we’d managed to call in two small bulls and had covered a lot of ground. From glassing to sneaking timber to calling, we’d been working hard to locate elk of any kind. What had held a lot of elk just months earlier now felt as if aliens had sucked all the wildlife from the area. With warm temps and wind consistent in the forecast I called the first hunt after 10 days of solid effort. We’d see if we could get a change in weather and come back. I still had over 20 days in the season so we had time to see if more favorable conditions might show up.

elk hunting, montana wild, wyoming, elk

Over the following weeks I made two more trips to my unit. One of those with my good friend and avid elk hunter Brandon Purcell and the other with my roommate Logan Summers. We continued to see nice bulls but nothing that was noticeably larger or had any real “wow” factor to them. At this point I wondered if there were any bigger bulls.

Maps were poured over, ideas thrown around, but at the end of the day I decided to end my hunt by going back to where we’d seen the majority of bulls and spend 4 days re-hunting those zones. The final push would just be me and my brother Travis. We’ve killed a lot of elk together over the years so hopefully this trip would be no different.

elk hunting, montana wild, stone glacier skyscraper 2P, zack boughton

After about 5 and a half miles and 4000’ of vert we hit our camp spot. Snow had moved in and looked as if was going to hang around for a while. We saw four small bulls that night so we knew elk were in the area. The following morning broke with light snows and we moved to our first glassing point. The same bulls from the previous night casually grazed as snow filtered in and out. Quickly we felt that if the weather was going to hold we should circle the mountain to the west and look at some of the harder to reach areas. After an hour of hiking we caught a 20 minute window of visibility before the weather rolled in. For the next seven hours we stoked the fire, ate snacks and tried to glass anytime we got a small window of visibility. In the end we saw zero elk and a handful of mule deer does that appeared to be slowly moving to new country. With just two days left I banked on the clearing weather and cold to have bulls up on their feet in the am.

elk hunting, montana wild, zack boughton

The following morning we left the tents an hour before first light. It was single digit cold and I didn’t want to sweat much as we climbed the 500’ to our glassing knob. We hit the top just as light was starting to filter across the frosty landscape. We donned puffy gear and got behind the glass. I quickly spotted two bulls on a small finger of grass above cliffs, a spot I’d highlighted on the maps before I ever stepped foot in the unit. This was the first time I’d seen bulls here but one had a heavy rack and his thirds extended outside the beams on both sides. I liked him but he wasn’t an immediate hell yes. We kept scanning and over the course of the morning saw a total of 31 bulls. I was able to relocate the original big bull that I’d passed on trying to kill at the very start of the hunt. He was with three other bulls, one of which I only caught a glimpse of his tops. I knew they were worthy of a play but we’d need to move camp closer to them. As the bulls slowly filtered into the timber the first bull of the day still lived rent free. Was he hiding length in his mass? Did I need to just get a closer look before we moved on? As I started hiking back towards the tent I could see where the first two bulls were at. In my binos I could see one of the bulls, the smaller of the two. They were about 1800 yards out and something just pulled at me to go take a closer look. It would only be a half out detour and so I told Travis were going down there to have a closer look. Fifteen minutes later I crept up to the edge and peered across the canyon. Immediately I spotted the bull I’d come to see. He was laying in the open but behind a tree which is why I couldn’t see him coming down off the mountain. He was a beauty. Not the size and score of what I dreamed this hunt would provide, but a heavy, gorgeous bull living in country that exemplified the ruggedness of the unit. In my heart I quickly knew this was the one. I’d expended a lot of energy to find something world class and although the score sheet wouldn’t show it, this bull in this moment was world class.

elk hunting, bull elk, montana wild, rifle hunting

After telling Travis, we quickly got setup to take a shot. The wind was light, just a 4-6mph breeze and I knew it had the likelihood of picking up. At just over 500 yards I knew my skills could deliver a lethal shot with high probability. I got behind the gun, picked my spot, confirmed my wind call and slowly pressed the trigger. The shot broke clean and I saw my bullet hammer through the front shoulder. The bull stood up holding his front leg, wobbled, and then fell over backwards into the snow. Twenty one days in and my tag was filled. We soaked in the beauty of the morning, the sun shining into the snow covered canyon, fog slowly rising through the jagged cut below us.

zack boughton elk hunting

An hour later we’d circled the canyon and made it to my bull. He was just a pretty up close. We took some photos and video and proceeded to begin the process of cutting him up and creating a gameplan for getting the meat off the mountain. We were in griz country so we knew having a solid plan would help us get all the meat home safely. That night we moved two hind quarters up to a tree that we would use as a rendezvous point with some help that would come in the next day to help pull the whole bull off the mountain.

elk hunting, bull elk, montana wild, hunting film, zack boughton, travis boughton

zack boughton, elk hunting, rifle hunting elk, wyoming

The next morning we woke up early to go get the last two quarters, backstraps and head. The wind was ripping and the temps were in the twenties. Hands barely worked as we strapped meat into our packs and prepared for the hike up to camp. After an hour of hiking we hit our meat tree and were able to get the entire bull in one spot. We hustled to camp so we could break down our tent and get all of our gear into our packs. We were lucky to have some exceptional friends come up the mountain that morning to help pack the bull off the mountain. Jordan, Caleb, and Chylo all showed up and after some chit chat around the fire we began the process of dividing up the bull and putting it into packs. After three hours of solid hiking we finally hit the truck. We were all tired but happy to be at a lower elevation, sipping a cold beer, and laughing amongst ourselves. It had been a hell of a hunt. I’d given it my all and was rewarded with an experience that will never fade.

Words: Zack Boughton (@zackboughton)

Photos: Travis Boughton (@tjboughton)

elk, truck bed, bull elk, ford, hunting

The ultralight craze has been going on for years now, ounces turn into pounds as they say!  Much of the advancement in technology that saves us weight is and has been a good thing.  That said, there is a fine line between counting ounces, and maintaining performance and comfort.  Take backpacks for example, I’d definitely go 1-1.5 pounds heavier to have a pack that feels good on my back and will reward me when I turn my 35-50 pound load into an 80-100 pound load.  Food, cut ounces where you can but if you don’t get the nutrition and calories you need your physical performance will suffer.  A sleeping pad/sleeping bag, lots of weight can be cut here on many guys setups but at the end of the day I pick a pad that gives me the best sleep even if it does weigh an extra 8-16 ounces.  All that said I believe the same theory applies with rifles.  For the past 6 years or so I’ve been hunting with a 300WSM built by Snowy Mountain Rifles.  We picked components that would yield a durable and extremely accurate hunting rifle.  It weighs 12lbs 1oz without ammo so add in bullets and a sling and we’re right around 13lbs.  Not light by any means but a tack driver and something that once you lay down behind it it’s not going to move on you.  The past few years I’ve done more backcountry hunts for multiple days and although I can handle the weight I’d be happy to shave 2-4 pounds off my setup if possible.  This year I decided to build a new Mountain Hunting Rifle, one that would fall more in the middle of too light and too heavy.

THE GUN

Already having a custom rifle I wanted to get my hands on a gun you could purchase over a store counter and see how I liked working with a factory gun.  After some research I finally decided on the Weatherby Mark V Ultra Lightweight in 300 Weatherby Magnum.  This caliber requires a 9 lug bolt and comes in weighing just 6 3/4 pounds.  A few things that attracted me to the rifle were weight, the sub-MOA guarantee, a 54 degree bolt lift, and a hand lapped and fluted barrel.  The rifle also looks great and with a muzzle brake should be a great shooting gun.

Weatherby Mark V Ultra Lightweight, rifle, weatherby, mountain, hunting, lightweight, mountain hunting rifle

COMPONENTS AND SETUP

Getting the rifle is one thing, but setting up the gun to shoot is another.  First was the scope.  I wanted a few things in my scope: durability, high quality glass, and precise and repeatable elevation and windage adjustment.  I decided on going with the Vortex Razor HD AMG 6-24×50.  This scope is made in the USA and is an amazing scope especially with a weight of only 28.8 ounces.

vortex optics, razor hd, amg, built in the us

To mount the scope I decided on an EGW 20MOA Picatinny Rail as my starting point and then Vortex Precision Matched Rings would hold the scope firmly in place.  I also had purchased a Timney trigger in hopes of getting my trigger weight down close to the 1 pound threshold that I’m accustom to.  To finish it off I’d be putting a Triad Tactical check piece on the stock to help get a better cheek weld and still be able to comfortably see through the scope.

To install the optics and trigger I dropped into the Snowy Mountain Rifles Custom Shop and had old friends Greg and Jim help me out.  First things first we tried to install the new Timney trigger and set it to the 1.5 pounds that they advertised.

Jim installing the new trigger

Jim installed the trigger but anytime the trigger was set to less than two pounds the firing pin would go off as the bolt was racked forward.  Not good.  After working with it we decided to see what we could get out of the stock LXX Trigger which was advertised as being able to go to 2.5 pounds.  It had felt great initially and the only reason I wanted a different trigger was that I’m used to shooting a 15oz Jewell trigger and am a big proponent of a light trigger.  Jim worked on re-installing the factory trigger and after some work and testing it was safely pulling right around 2 pounds.  Sweet!

1lb 15.9oz

Greg then threw the rifle in the vice and began the process of mounting up the scope.

tactical gun build, EGW picatinny rail

Lining up the mount points

weatherby, mark v, ultra lightweight, mountain hunting rifle

Level, level and more leveling

After the rail went on the rings were mounted.  We adjusted the scope to fit my eye relief and then began leveling and tightening the rings.  Each ring was tightened accordingly with a torque wrench and soon we were in business.  At this point we added a Flatline Ops 30mm Sniper Accu/Level and called it good.  We took it over to the scale to see what our weight was.

The final measure: 9 pounds 9 ounces without ammo and before we added the cheek piece.  The hunting weight should fall just over 10 pounds.  Now by industry standards this is not an ultra light rifle but in my opinion it’s a lightweight rifle ready for multi-day backpacking trips in the mountains of Montana, Idaho and Wyoming.

mountain hunting rifle, weatherby mark v, ultra lightweight, razor hd amg, hunting, rifle, gun

INITIAL THOUGHTS

At the start of this process I was shooting for a build that would be in the 9 pound range so I went a little over my goal, but after shooting it I think it will be the perfect blend of weight, accuracy, and durability.  I’ve shot guns in the 8 pound range and to be honest they are hard to keep on target from hunting positions if you don’t have a lot of practice with them.  My 300WSM is on the heavier side of the spectrum but when you lay down on either bipods or a backpack, it’s rock solid and all you need to worry about is leveling the rifle and a smooth squeeze.  That has made for lots of perfect one shot kills over the years.  I’m hoping this new rifle will do the same while shaving about three precious pounds.  On my way home from Missoula I decided to get out and put a few rounds through the gun to start getting acquainted with the rifle and my new setup.  One thing that I quickly noticed after shooting a few rounds was the 54 degree bolt action.

weatherby mark v ultra lightweight, building a lightweight hunting rifle

Bolt closed

weatherby mark v ultra lightweight

Bolt open

This made for quick and easy reloading while staying on target.

flatline ops, sniper, accu level

Flatline Ops bubble level

The Flatline Ops bubble level was great as flipping it out made it easily visible while prone and shooting.  Being able to flip it back behind the turret means less pieces of the gun to catch on clothing and brush when in the field.

Vortex Razor HD AMG

Locking turrets on the AMG are money.

Weatherby Mark V, hunting, rifle, montana

Fluted barrel and a flawless stock finish

Triad Tactic cheek piece

Kestrel, Elite 5700, hunting, rifle, Mark V, Weatherby

This pocket perfectly fits my Kestrel and will mean less fumbling around when a longer shot presents itself.

So far I’m excited about this rifle and will be working on breaking in the barrel a bit more and finding out which bullet and grain combination work best in the rifle.  As I continue on the process I’ll post up further blog posts.

Zack Boughton